PUF Panels
Technical Specification
Thickness: 60, 80, 100, 125 & 150mm as standard or as per clients requirement.
Door: (A) Flush Type Swing Door with FRP Profile, Imported hardware, Push Type gasket & replace -able heater for easy door operation & long life Opening Size: 24″x72″, 30′′x78″, 46″x84″ (Door Opening XH).
(B) Overlap Type swing door with frame with metal covering by using heavy duty hardware for better strength Opening Size:4 6″x84″,49″x84″, 54″x84″, 60″x90″(Door Opening WxH).
Floor: (A) For Kota stone or concrete floor, Puf Slab with both side tar felt coated.
(B) For Kota stone or concrete floor, both side metal surface panel in which each side fits with Camlock and prevent temperature loss.
(C) Aluminium Chequered Plate with Marine Ply.
(D) FRP CL adding on floor.
Surface Material: GI Pre-Painted Sheet, S.S. Sheet (Grade 304/316 & Surface finish 2B & Mate,GI Plain Sheet, Plain Galvanized Ir on. (Inside & Outside different metal can be places as per your requirement).
Room Size: (A) Length & Width minimum 1.78 mt and Bigger size 0.146 mt in multiples as per requirement.
(B) Standard Height for 60mm thickness 2.47mt, 80mm-2.51mt, 100mm-2.55mt, 125mm-2.60mt, 150mm-2.65mt and above as per your requirement.
Accessories
Sliding Door:
Opening Size
Width: 1000/1200/1500/1800 mm
Height: 2100 to 3000 mm.
Thickness: 80 mm
Panel Surface material: Both side GIPP or S.S. as per requirement
View Port:
12″x12″ View port with three layer argon filled, toughen glass which can be visible up to 2°C inside the Cold room.
Cam Lock Joining:
All Four sides Cam Lock joining.
Strip Curtain:
Semi transparent PVC Strip curtain for negative temperature application to prevent heat loss and ultimately the power.
